欢迎光临西安汉力邦汽车销售有限公司官网!

b.png

西安商务车改装

新闻分类

产品分类

联系我们

商务车改装保养车载音响的常见方法

您的当前位置: 首 页 >> 新闻中心 >> 技术知识

商务车改装保养车载音响的常见方法

发布日期:2018-11-02 作者: 点击:

车载音响偶尔也是会出一些故障的,这些故障虽然不是什么大事,不过体验不好也不舒服,今天西安商务车改装小编就来给大家介绍一下车载音响如何保养方法。

 

Car audio is also occasionally will be some fault, the fault is not what matters, but the experience is not good is not comfortable, business car today Xiaobian to introduce the method of how to repair car audio.

 

1、经常用湿润的小棉签擦拭

 

1, often with a small cotton wet swab wipe

 

音响中卡带机的压带轮和CD播放机的磁头都是容易堆积灰尘的地方。CD播放机里Z重要的部位是激光头,因为激光头是易损零件且比较昂贵,应重点养护。虽然现在部分汽车音响在设计过程中都考虑了防尘的问题,但防护措施也是必要的,您可以经常用湿润的小棉签擦拭卡带、带盒以及CD机的碟槽以及音响系统的面板。正确的做法是用湿布将尘土轻轻地吸下来。至于按键和旋钮的清理,可以再次使用棉签。

 

Audio cassette machine in the belt pressing wheel and CD player head is easy to accumulate dust. The most important part of the CD player is the laser head, because the laser head is damaged and the more expensive, should be the focus of conservation. Although now some car audio in the design process are considered the problem of dust, but protective measures is also necessary, you can often use wet cotton sign wipe cassette, cassette and CD disc groove and a sound system of panel. The correct approach is to use a damp cloth to gently suck down the dust. As for the buttons and knobs can be used again to clean up, cotton swab.

 

2、用清理工具清洁磁带和光碟

 

2, cleaning tool to clean the tapes and discs

 

除了音响的主机保持清洁外,磁带和CD光碟也要保证洁净。磁带和光碟上的污物不但会影响播放的音质,甚至会对音响造成损伤。CD机的激光头在高速运转时,如果遇到尘土,会使激光头偏离原有的激光轨道,造成声音的失真,并对激光头造成损害。据了解,磁带和光碟的清理工具在大多数的音像店中都可以买到。

 

In addition to the sound of the host to keep clean, tape and CD discs to ensure cleanliness. Tapes and discs on the dirt will not only affect the playback quality, and even cause damage to the sound. CD player laser head in the high-speed operation, if you encounter a dust, makes the laser head to deviate from the original laser track, sound caused by the distortion and the laser head damage. It is understood, tapes and discs of the cleaning tools are available in most of the shop.

 

3、慢放盘少换碟

 

3, slow or less changer

 

春季是汽车音响激光头损坏的高发期,因为气候干燥,容易产生静电。放盘的时候Z好不要用手直接去摸,不要拿中间,要慢慢放进去,尽量不要频繁换碟,塞盘时尽量要轻。

 

Spring is the car audio laser head damage peak period, because the climate is dry, easy to produce static electricity. Tray when it is best not to use hand to touch, do not take the middle, to slowly go, try not to frequent changer, plug board try to light.

 

4、音量不要突然放到Z大

 

4, don't suddenly to maximum volume

 

音响在使用当中要避免突然将音量放到Z大,这样喇叭线圈会烧,对功放会造成影响,振幅突然加大也会烧毁功放。

 

Sound in use to avoid sudden volume to maximum, so the speaker coil will burn, the impact on the power amplifier, amplitude sudden increase also will be burned out.


本文网址:http://www.hanlibang.com/news/412.html

关键词:西安商务车改装,商务车改装厂家,商务车改装价格

Z近浏览:

欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码
邮箱
邮箱
地址
地址